High-end acrylic display
First brand

Compared with the traditional ceramic materials, acrylic has the following advantages besides unparalleled high gloss: good toughness, not easy to be damaged, and strong restorative property, so long as you use a soft foam to dip into the toothpaste, you can wipe the new sanitary ware; the texture is soft, and there is no cold chill feeling in winter; the colourful color can satisfy the individuality pursuit of different tastes. Using acrylic to make basins, bathtubs and toilets is not only exquisite in style, durable, but also environmentally friendly. Its radiation level is almost the same as that of human skeleton. Acrylic sanitary ware first appeared in the United States, and now occupies more than 70% of the international market. In China, Sichuan Oriental Sanitary Ware Factory took the lead in introducing this technology from abroad, and applied for registered patents in China. Now, Yakeli Sanitary Ware brands such as "Emperor" and "Jazz" are also favored by more and more consumers.

Because acrylic is difficult to produce and its cost is high, there are many substitutes of high quality and low price in the market. These substitutes, also known as acrylic, are actually ordinary organic or composite boards (also known as sandwich boards). Ordinary organic board is cast with ordinary organic glass cracking material and pigment. Its surface hardness is low, and it is easy to fade. After polishing with fine sand, the polishing effect is poor. The composite board has only a very thin acrylic surface and ABS plastics in the middle. It is easy to delaminate due to thermal expansion and contraction in use. The true and false acrylic can be identified from the slight chromatic aberration and polishing effect of the sheet section.

Here are some small ways to identify the quality QC of DongGuan TOYIN Crafts Co., Ltd. One look, two smells, three burns and four frictions.

Look: Mainly for transparent board and whiteboard, see if the thickness is yellowing;

Smell: refers to whether there is a pungent odor in the process of cutting.

Burning: Look at the color of the main flame, look at the bubbles, impurities and the length of wire drawing after the flame is extinguished.

Friction: It depends on the hardness and fragrance of the surface.