High-end acrylic display
First brand

Acrylic is a special plexiglass (PMMA), also known as acrylic, Hongkong called its "Asia Power". In fact, acrylic, acrylic, plexiglass and augmented force are all names of materials. Today we will focus on some parameters of inferior acrylic material.

 

During the production of acrylic, the trend of temperature change in the molding process is: 210 degrees, two sections 200 degrees, three segments 180 degrees, four segments 170 degrees. It is worth noting that the acrylic material is easily deformed at high temperature, so the cooling time should be longer. Our factory once produced acrylic products with acrylic material -- cell phone lenses. The cooling time of acrylic was 10 seconds when it started making acrylic. As a result, the lenses were all deformed and can not be used. The cooling time was changed to 30 seconds later. The lenses made of mobile phones were very transparent, clean and flat.

 

Acrylic has high transparency and transmittance of over 92%. It has the reputation of "plastic crystal". And it has very strong weatherability. It can see the characteristics of acrylic. The density of acrylic is 1.19kg/dm3, and the impact strength of acrylic is as high as 16kg/cm3, the tensile strength is greater than equal to 61Kg/m3. The ultimate strength and tensile strength of acrylic can be measured with acrylic tensile strength, impact strength and transmittance. In this article, the impact strength and tensile strength of acrylic are explained in body. The test of degree. In the acrylic is higher than the temperature of 78 degrees Celsius above can melt, thermal softening temperature more than 105 DEG C. So, the molding of acrylic material is good.